Armstrong Clark Deck Stain Review
Important Note: This is our 3rd Review of Armstrong Clark Stain.
Armstrong Clark Wood Deck Stain is a highly regarded oil based stain formulated with 5 generations of stain industry experience. Armstrong Clark is available in several formulas: Transparent, semi-transparent, and semi-solid colors.
Armstrong Clark Deck Stains are uniquely blended with drying and non-drying oils that isolate from each other during application. The non-drying oils penetrate the wood fibers and help rejuvenate and condition lost natural oils while the drying oils cure on the surface to lock in the conditioning oils and form a barrier of weather protection at the surface.
Armstrong Clark Stain Review
Armstrong Clark Stain Scores (1-10)
Appearance After Initial Stain Application: 9
– The initial appearance of Armstrong Clark was a rich deep finish with naturally enhanced wood grain showing through the semi-solid formula. Our choice of the Cedar Semi-Transparent color had a rich cedar tone.
Preventing UV Graying at 2 Year Mark: 8
– Upon our 2-year inspection, Armstrong Clark Wood Deck Stain produced above average UV resistance. Being a semi-transparent Cedar color we projected better than average UV shielding and it did not disappoint. It would seem to us that the transparent colors would deliver slightly less UV shielding due to less pigment in the formula, while the semi-solid colors of the AC would have slightly better UV protection when in full sun.
Wear/Tear and Peeling: 9
– No peeling was detected at the 2-year point. There was slight wearing on the high traffic areas, around the furniture, and on the stairs.
Cost Per Square Foot: 9
– Armstrong Clark Deck Stain can be purchased for $38.99-$45.99 depending on the opacity of the formula. In our test experience, Armstrong Clark had one of the best spread rates of any stain. We used a total of 3.5 gallons on our 600 square foot deck applied in one coat.
Preventing Mold/Mildew/Algae: 8
– At 2 years we noticed some slight mold growth on top of the Armstrong Clark stain in some shaded areas. We did not detect any mildew spores within the stain as the mildew spores could be wiped away using a wet towel.
Ease of Application: 9
– The Armstrong Clark Deck Stain was super easy to apply and extremely user-friendly. Upon the manufacturer’s claims of being able to apply in direct sunlight, we tested our application on a 90-degree day in full sun. We were surprised the stain did not dry too quickly and applied evenly in those conditions. There were no excess dripping issues on the railings even though we applied using a pump sprayer and back wiped with a stain brush. The semi-transparent stain applied well using this method.
Color Shifting (darkening) after 2 Years: 8.5
– Our 2-year test of Armstrong Clark Stain in Semi-Trans Cedar color did show signs of slight darkening from its original color. We figured this was likely due to a higher solid content of the formula. The AC is over 70% solids, containing both linseed and paraffin oils.
Difficulty of Reapplication: 8.5
– Because Armstrong Clark Wood Deck Stain penetrates well and did not overly darken it would be easy to recoat. A simple cleaning with a wood deck cleaner to remove dirt, grime, and mold spores would be plenty sufficient prior to reapplying.
Overall Score Armstrong Clark Stain at 2 Year Period: 8.5
– Armstrong Clark Wood Stain held up well at our 2-year test mark. Easy to apply and terrific coverage rates, raise Armstrong Clark to a high level. No peeling and only a slight darkening color shift were more than acceptable. Easy to maintain and prep prior to recoating. Armstrong Clark is definitely one of our top choices for a professional durable finish that lasts and is easy to work with in the future.
Product Information:
More Info: ArmstrongClarkStain.com
Cost: $38.99 per Gallon, $209.99 per 5 Gallon Pail
Stain Type: Transparent, Semi-Transparent, Semi-Solid – Oil-Based
Available Colors: Transparent Natural, Transparent Cedar, Transparent Redwood, Semi-Trans Cedar, Semi-Trans Rustic Brown, Semi-Trans Sierra Redwood, Semi-Trans Amber, Semi-Trans Mahogany, Semi-Solid Mountain Cedar, Semi-Solid Woodland Brown, Semi-Solid Oxford Brown, Semi-Solid Sequoia, Semi-Transparent Chestnut, Semi-Trans Natural Oak, Semi-Trans Black Walnut for Hardwoods
Application Temperature: 50-110 F
Coats Required: 1 Coat
Coverage Per Gallon: 200-250 sq. ft
Application Tools: Sprayer, Pad, Brush, Roller
Dry Time: 8-72 Hours, Depending on UV exposure and air temps
Cleanup: Mineral Spirits
VOC Compliant: Under 50 VOCs. Compliant in All 50 States and Los Angeles Counties
More Info: Product Data
Manufacturer: Armstrong Clark
Test Deck Stats:
Deck Wood Type: Pressure Treated Pine
Deck Square Footage: 600
UV Exposure: Full Sun
How Many Years Tested: 2 Years
Stain Color Used: Semi-Transparent Cedar
*All products tested and results are from our experience. We offer no guarantee of similar results. Take inconsideration that results may differ due to different wood types, exposure to UV radiation, and natural weathering.
